Yuyao Yinuo Communication Equipment Co., Ltd.  

Product Name: ADSS Fiber Optic Cable Clamp 8-11mm Model NO.: PA-1500 Type: Tension Clamp Usage: Line Fittings Standard: GB Technics: Injection Molding Max Load: 15kn Trademark: no Transport Package: Carton Specification: aluminium Origin: China Product Description ANCHORING CALMP FOR ADSS CABLES INSTALLED ON SHORT SPANS (100M MAX)PRODUCT OVERVIEWThese clamps are designed for dead-ending aerial ADSS cables on access networks when spans do not exceed 100m. Different capacities are available to adapt to the cable Ø.APPLICATIonThese clamps will be used as cable dead-end at end poles (using one clamp).Two clamps can be installed as double dead-end in the following cases :• at jointing poles• at intermediate angle poles when the cable route deviates by more than 20°.• at intermediate poles when the two spans are different in lengths• at intermediate poles on hilly landscapesFEATURES• Dead-ending of 8 to 11 mm,11-14mm ADSS cables• Minimum breaking load of 15 Kn• Installation on any pole hardware fitting :brackets, cross-arms or eye bolt with a min eye Ø of 15 mm• 4kV thimble as standard. 11 kV thimble available• All plastic parts are UV resistant and tested in conditions equivalent to min 25 years of service in tropical environmentDEscriptIonThese anchoring clamps are made of an opened Aluminum body, a pair of plastic wedges and a flexible bail equipped with an insulating thimble. The bail can be locked onto the clamp body once passed through the pole bracket and re-opened by hand at any time when the clamp is not under full load. All parts are secured together to prevent any loss during installation.RangeApplicable cableTypeMBL,KnCable Size, mmWeight,kgLV ABC Cable,ADSSPA-1000108-110.4PA-15001511-140.4